Evacuated Tube Systems
With over 30 YEARS of experience in solar solutions, We introduce our association with the Hiramrut Group, and its solar division, Uratom Solar (India) Pvt Ltd.- AN ISO 900 1:2008 & ISO 14001 certified company,who is one of lndias leading manufacturer of solar water heaters, solar lighting systems & solar cookers. The company is so dedicated to the going green initiative, that in the entire country, Uratom is the only true eco-friendly manufacturer that use renewable energy for the production of solar equipment!
Having state-of-art production line supported by their own R&D,Uratom ensures supreme quality standards with higher efficiency solar products for domestic, commercial as well as industrial purposes. Production, drawing & designing is prepared & finalized under strict quality inspection by qualified engineers.
ETS, also known as Vacuum Tube Systems are another aspect of thermal energy in use to Heat water. Its primary benefits are its durability in hard water, lower cost, as well as less radiation required compared to the Flat plate systems to achieve the same temperature.Generally these come in the standard non pressurized configuration.In other words, this system cannot be normally coupled with a pressure pump. However, Solar Concepts delivers the ETS system that can withstand a pressurized water system up to 5bars.
Solar hot water has come a long way in the last decade, particularly with the introduction of evacuated tube collectors that are rapidly becoming the preferred option over flat plate systems.
Evacuated tube collector based systems :
Benefits for you:
Roughly, An Average Family Of 4 In Tanzania At The Given Electricity Rate (2014), There Would Be An Yearly
Expense OfOver 848,690/- Shillings just For Water Heating.
These Rates Of Electricity Have More Than Doubled Over The Past Few Years And The Future Rates Might Not Remain The Same.Given The Rising Energy Costs, Your System Payback Is Possible Within 3 Years!
Technical Specifications for Tank
|Inner Tank||2.5mm GalvanizedIron (G.I) Plazma Welded|
|Inner Coating||High Grade Anti-Corrosive Coating|
|Outer Cladding||O.5mm Galvanized Iron (G.I) with P P Powder Coating|
|Insulation||5Omm PUF (38kg./ mt3 density)|
|Stand||1.6mm (G.I) with P P Powder Coating Or 30 x 30 x 3mm M.S with P P Powder Coating|
Technical Specifications of Vaccum Tube
|Material||1.6mm Borosilicate 3.3 glass|
|Outer Diameter||¢47mm / 58mm / 70mm (whateverapplicable)|
|lnnertube Dia||¢ 37mm / 47mm / 54mm (whateverapplicable)|
|Tube Length||15OOmm / 1800mm / 2100mm (whatever applicable)|
|Absorptive coating||CU - AL- N / SS (Three Layer)VacuumP < 5 x 10-3 PA|
|Absorptance||> 92%(Am 1.5)|